Off-Car DPF Cleaner
W18985 · 5000ml
For manual cleaning when the DPF is too heavily blocked and standard regeneration methods fail.
- For heavily blocked DPFs (over 70% soot loading)
- DPF removal required
- In-house workshop cleaning solution
- Approx 2 hours soak time
| Parts | Effectiveness |
|---|---|
| DPF/GPF |
|
Compatibility
| Engine |
|---|
How to use
- Remove filter from vehicle and remove sensors
- Seal end of filter and any openings where sensors were removed
- Fill filter with Wynn’s Off-Car DPF Cleaner ensuring surface of filter is covered
- Allow to soak for 90-120 minutes. Extremely contaminated filters can be left for up to 8 hours.
- During soaking filter can occasionally be gently agitated to aid cleaning
- After soaking is complete, the filter should be emptied.
- Rinse the filter from both sides with warm water. Ensure that any contaminant flush is drained out from the filter, and continue until the water runs clear through all openings/apertures.
- Gently dry filter using low pressure air from an air line
- Refit filter
Additional Information
Product Code
Capacity
Units per case
Packaging Languages
W18985
5000 ml
4
EN
